Indoor LSZH Riser Premises Distribution (PDRZ)
Description
Berk-Tek’s tight buffered low smoke zero halogen riser premises distribution fiber optic cable is designed for installation in riser and horizontal environments and interbuilding backbone structures.
Description
Standards
International : EN 50173; IEC 60332-1-2; IEC 60332-1-3; IEC 60332-2-2; IEC 60332-3-24 Cat.C; IEC 60332-3-25 Cat.D; IEC 60754-1; IEC 60754-2; IEC 61034-2; ISO/IEC 11801; NES 713National : ANSI/ICEA S-83-596; Telcordia GR-409
Description
Berk-Tek's tight buffered cable is available with standard multimode, single-mode and GIGAliteTM fibers.
Construction
900 µm buffered fibers surrounded by aramid yarns. Sheathed using a special, state-of-the-art low smoke zero halogen polymer material.
All dielectric.
Outdoor Considerations
Black jacketed and water-blocked versions of riser cables are available upon request for outdoor installations. Outdoor versions feature UV and fungus resistant jacketing.
Flame Rating
OFNR-LS
Applications
Berk-Tek's tight buffered cable is intended for all high speed data applications including:
- ETHERNET: 10BASE – 400GBASE (10BASE, 100BASE, 1000BASE, 10GBASE, 40GBASE, 100GBASE, 400GBASE)
- Fibre Channel: 1G-FC – 128GFC (1, 2, 4, 8, 16, 32, 128 GFC)
- SONET: OC-1 – OC-768 (OC -1, 3, 12, 24, 48, 192, 768)
- SDH: STM-0 – STM-256 (STM-0, 1, 4, 16, 64, 256)
- OTN: OTU-1 – OTU4 (OTU1, 2, 2e, 2f, 3, 3e2, 4)
- CPRI: CPRI-1 – CPRI-9 (CPRI-1, 2, 3, 4, 5, 6, 7, 7a, 8, 9)
Features
- Low Smoke Zero Halogen rated cable
- Flexible, small diameter, 900 µm tight buffered construction
- High tensile strength and small diameter design
- Six to 48 count fiber construction riser designs ideal for horizontal and backbone installation
- Single-mode, multimode, and hybrid designs available
- Water blocked versions, suitable for Indoor/Outdoor installations, in-conduit, below the frost line, are available
Benefits
- Cost-saving design, easy to install and terminate
- Provides for greater pulling distances thus reducing installation time
- Assurance that cables will meet required specifications for communication networking applications
- Broad design selection allows for mix and match of fiber components to specific networking applications
- One cable design meeting all structured cabling network communications applications
Products and services
Docs and info
-
PDRZ Characteristics
-
Standard Sheath Colors - Tight Buffer
-
Manufacturing Release
IMPORTANT NOTICE: This product specification is provided for informational purposes only in order to illustrate typical product constructions, applications and/or methods of installation. Because conditions of actual installation and use are unique and will vary, Berk-Tek makes no representation or warranty as to the reliability, accuracy or completeness of this data, even if Berk-Tek is aware of the product's intended use or purpose. Furthermore, this data does not constitute, nor should it be regarded or relied upon, as professional engineering advice. Installation of product should only be done by qualified personnel and in conformance with all safety, electrical and other applicable codes, standards, rules or regulations. Appropriate and correct product selection, installation and use, and compliance with all such codes, standards, rules and regulations, is a customer/end-user responsibility. Product specifications, standards, programs or services are subject to improvement or changes without notice. Berk-Tek accepts no liability for typographical errors, technical inaccuracies, omissions or misuse of the information contained herein. Changes will be periodically made to address any such issues.
