Indoor/Outdoor Plenum CL3P (ACPC, HDPC)
Description
Berk-Tek’s Composite Copper/Fiber cables incorporate high bandwidth optical fibers with insulated copper conductors. A wide variety of design options are available including; up to four #12 AWG solid conductors, up to 2 tight buffered fibers (HDPC) or 12 loose tube fibers (ACPC), and interlock armoring. These cables are listed as CMP-OF and CL3P-OF/PLTC-OF. A key application of these cables is to extend the distance that powered devices can be installed from the power source in Power over Ethernet (PoE) installations. Proper conductor size selection can increase this distance from 328 feet to several thousand feet. The powered device could be an IP camera, a wireless access point, or other building automation device located in an area where an electrical outlet is not readily available.
Description
Standards
International : EN 50173; ISO/IEC 11801National : ANSI/ICEA S-104-696; ANSI/TIA-568-C.3; NFPA 130; Telcordia GR-409; UL 13; UL 444
Description
Construction
Each cable consists of multiple plenum insulated copper conductors and multiple fibers cabled together within an outer jacket. Cable design accommodates from 2 to 4 conductors.
- Fibers can be tight buffered (HDPC, 1 or 2 fibers) or in a loose tube (ACPC, 1-12 fibers)
- Plenum-rated cable is dry waterblocked for indoor/outdoor installations
- Aluminum interlock armored cables available
Applications
Berk-Tek’s Composite cables are suitable for all power limited applications where optical fibers are needed. Specific applications include (but not limited to):
- Power over Ethernet (PoE) length extension
- Distributed Antenna Systems (DAS) connections
- Combining control and communication in industrial pathways
- Common pathway for fiber backbone and Class 3 power supply
- ETHERNET: 10BASE – 400GBASE (10BASE, 100BASE, 1000BASE, 10GBASE, 40GBASE, 100GBASE, 400GBASE)
- Fibre Channel: 1G-FC – 128GFC (1, 2, 4, 8, 16, 32, 128 GFC)
- SONET: OC-1 – OC-768 (OC -1, 3, 12, 24, 48, 192, 768)
- SDH: STM-0 – STM-256 (STM-0, 1, 4, 16, 64, 256)
- OTN: OTU-1 – OTU4 (OTU1, 2, 2e, 2f, 3, 3e2, 4)
- CPRI: CPRI-1 – CPRI-9 (CPRI-1, 2, 3, 4, 5, 6, 7, 7a, 8, 9)
- PON (SMF only): RFoG, APON, BPON, EPON, GPON, WDM-PON, NG-PON
Features
- Multimode, Single-mode, and GIGAliteTM fibers
- CMP-OF and CL3P-OF/PLTC-OF, wet and dry rated
- Aluminum interlock armored designs available
Benefits
- Enables PoE equipment to be located more than 100 meters from the switch
- CMP-OF and CL3P-OF/PLTC-OF allows cable to be installed in communication pathways
- Ease of installation
- Broad design selection allows for mix and match of copper and fiber components to specific networking applications
- Armor option adds crush resistance and is a cost effective alternative to plenum innerduct.
Country of Origin: U.S.A.
Products and services
Docs and info
-
Conductor Color Sequence - CL3P
1 2 3 4 Black White Blue Yellow Green is also available for use as a ground. Custom color sequences chosen from the colors above are available upon request.
-
Sheath Colors - CL3R(K) & CL3P(K)
_9.png "open full size image in a separate window")
-
Manufacturing Release
IMPORTANT NOTICE: This product specification is provided for informational purposes only in order to illustrate typical product constructions, applications and/or methods of installation. Because conditions of actual installation and use are unique and will vary, Berk-Tek makes no representation or warranty as to the reliability, accuracy or completeness of this data, even if Berk-Tek is aware of the product's intended use or purpose. Furthermore, this data does not constitute, nor should it be regarded or relied upon, as professional engineering advice. Installation of product should only be done by qualified personnel and in conformance with all safety, electrical and other applicable codes, standards, rules or regulations. Appropriate and correct product selection, installation and use, and compliance with all such codes, standards, rules and regulations, is a customer/end-user responsibility. Product specifications, standards, programs or services are subject to improvement or changes without notice. Berk-Tek accepts no liability for typographical errors, technical inaccuracies, omissions or misuse of the information contained herein. Changes will be periodically made to address any such issues.
