Indoor/Outdoor Riser CL3R w/ Armor-Tek™ (ACRCK, HDRCK)
Description
Berk-Tek’s Composite Copper/Fiber cables incorporate high bandwidth optical fibers with insulated solid copper TFFN or THWN conductors. Armor-Tek Interlocking Armor is wrapped around the CL3R-OF cable core. A wide variety of design options are available including; up to eight #12 AWG conductors, up to 7 tight buffered fibers (HDRCK) or 12 loose tube fibers (ACRCK). These cables are listed as CMR and CL3R-OF/PLTC-OF. A key application of these cables is to extend the distance that powered devices can be installed from the power source in Power over Ethernet (PoE+) installations. Proper conductor size selection can increase this distance from 328 feet to several thousand feet. The powered device could be an IP camera, a wireless access point, or other building automation device located in an area where an electrical outlet is not readily available.
Description
Standards
International : EN 50173; ISO/IEC 11801National : ANSI/ICEA S-104-696; ANSI/TIA-568.3-D; Telcordia GR-409; UL 13
Description
Construction
Each cable consists of multiple TFFN or THWN copper conductors and multiple fibers cabled together within an outer jacket. Cable design accommodates from 2 to 8 conductors and 1 to 12 fibers.
- Fibers can be tight buffered (HDRCK) or in a loose tube (ACRCK)
- Aluminum interlock armored
Applications
Berk-Tek’s Composite cables are suitable for all power limited applications where optical fibers are needed. Specific applications include (but not limited to):
- Power over Ethernet (PoE+) length extension
- Combining control and communication in industrial pathways
- Common pathway for fiber backbone and Class 3 power supply
- ETHERNET: 10BASE – 400GBASE (10BASE, 100BASE, 1000BASE, 10GBASE, 40GBASE, 100GBASE, 400GBASE)
- Fibre Channel: 1G-FC – 128GFC (1, 2, 4, 8, 16, 32, 128 GFC)
- SONET: OC-1 – OC-768 (OC -1, 3, 12, 24, 48, 192, 768)
- SDH: STM-0 – STM-256 (STM-0, 1, 4, 16, 64, 256)
- OTN: OTU-1 – OTU4 (OTU1, 2, 2e, 2f, 3, 3e2, 4)
- CPRI: CPRI-1 – CPRI-9 (CPRI-1, 2, 3, 4, 5, 6, 7, 7a, 8, 9)
- PON (SMF): RFoG, APON, BPON, EPON, GPON, WDM-PON, NG-PON
Features
- Multimode, Single-mode, and GIGAlite™ fibers
- CMR and CL3R-OF/PLTC-OF wet and dry rated
- Aluminum interlock armored, with a riser rated outer jacket
Benefits
- Enables PoE+ equipment to be located more than 100 meters from the switch
- Cost savings versus installation of a new electrical outlet
- Broad design selection allows for mix and match of copper and fiber components to specific networking applications
- CMR and CL3R-OF/PLTC-OF ratings allow cable to be installed in communication pathways
- Eliminates the need for conduit or riser innerduct
- Ease of installation, accommodating last minute relocations or pathway changes
- Armor adds crush resistance and protection from rodent attacks
- Significant cost savings in both materials and labor - up to 25%
Products and services
Docs and info
-
Sheath Colors - CL3R(K) & CL3P(K)
_9.png "open full size image in a separate window")
-
Conductor Color Sequence - CL3R
1 2 3 4 5 6 7 8 Black White Blue Yellow Brown Orange Purple Pink Green is also available for use as a ground. Custom color sequences chosen from the colors above are available upon request.
-
Manufacturing Release
IMPORTANT NOTICE: This product specification is provided for informational purposes only in order to illustrate typical product constructions, applications and/or methods of installation. Because conditions of actual installation and use are unique and will vary, Berk-Tek makes no representation or warranty as to the reliability, accuracy or completeness of this data, even if Berk-Tek is aware of the product's intended use or purpose. Furthermore, this data does not constitute, nor should it be regarded or relied upon, as professional engineering advice. Installation of product should only be done by qualified personnel and in conformance with all safety, electrical and other applicable codes, standards, rules or regulations. Appropriate and correct product selection, installation and use, and compliance with all such codes, standards, rules and regulations, is a customer/end-user responsibility. Product specifications, standards, programs or services are subject to improvement or changes without notice. Berk-Tek accepts no liability for typographical errors, technical inaccuracies, omissions or misuse of the information contained herein. Changes will be periodically made to address any such issues.
