Outside Plant Dry Loose Tube - Single Armor Single Jacket (LTAD-1A1J-M2)

Description
Berk-Tek’s Single Armor Single Jacket Outside Plant fiber optic cables are designed for installation in harsh environments such as direct burial, conduit and pathways that are subjected to wide temperature variations. The Armored Dry Loose Tube Outside Plant product is offered with 2 - 288 fibers per cable. These cables are thoroughly tested and verified to Telcordia GR-20 and ICEA-640 for outside cabling systems.

Description
Standards
National : ANSI/ICEA S-87-640; ANSI/TIA-568.3-D; Telcordia GR-20Description
Berk-Tek's Outdoor Single Armor Single Jacket Dry Tube Jacket Loose Tube cables are available in multimode, single-mode and GIGAlite™ fibers.
Buffer Tube Construction
Tubes contain water-blocking yarn and up to 12, 250 µm, individually colored fibers.
Outdoor Consideration
Berk-Tek recommends that loose tube cables be utilized in an outside plant installation environment. Loose tube cables are especially recommended if the interbuilding conduit system is above the frost line and likely to fill with water.
Applications
Berk-Tek's Outdoor Loose Tube fiber optic cable is intended for all high speed data applications, including:
- ETHERNET: 10BASE – 400GBASE (10BASE, 100BASE, 1000BASE, 10GBASE, 40GBASE, 100GBASE, 400GBASE)
- Fibre Channel: 1G-FC – 128GFC (1, 2, 4, 8, 16, 32, 128 GFC)
- SONET: OC-1 – OC-768 (OC -1, 3, 12, 24, 48, 192, 768)
- SDH: STM-0 – STM-256 (STM-0, 1, 4, 16, 64, 256)
- OTN: OTU-1 – OTU4 (OTU1, 2, 2e, 2f, 3, 3e2, 4)
- CPRI: CPRI-1 – CPRI-9 (CPRI-1, 2, 3, 4, 5, 6, 7, 7a, 8, 9)
Features
- High tensile strength, crush resistant and small diameter design.
- Single-mode, multimode and hybrid design options available.
- Corrugated steel armor provides crush and rodent resistance.
- Fully water-blocked core using dry water blocking system.
Benefits
- Provides for greater pulling distances thus reducing installation time.
- Broad design selection allows for mix and match of fiber components to specific networking applications.
- Long-term reliability.
- Low cable plant maintenance, ease of installation.
- Reduce network costs.
Country of Origin: U.S.A.
Characteristics
Construction characteristics | |
---|---|
Jacket Material | Polyethylene |
Usage characteristics | |
RoHS compliant | Yes |
Recommended operating temperature range | -60 .. 70°C |
Ambient installation temperature, range | -30 .. 60°C |
Recommended storage temperature range | -40 .. 75°C |
Specific characteristics | |
See all products | |
|
Products and services
Docs and info
Sheath Colors
Fiber Type |
Core |
ISO-TIA |
Effective Modal |
Overfilled Launch |
Attenuation |
Attenuation |
Attenuation |
Sheath Color |
AB |
8.3 |
OS2 |
NS |
NS |
NS |
0.3 dB/km |
0.2 dB/km |
Black |
AB |
8.3 |
OS2 |
NS |
NS |
NS |
0.4 dB/km |
0.3 dB/km |
Black |
CB |
62.5 |
OM1 |
200 MHz-km |
200 MHz-km |
3.5 dB/km |
1.0 dB/km |
NS |
Black |
EB |
50 |
OM3 |
2000 MHz-km |
1500 MHz-km |
3.0 dB/km |
1.0 dB/km |
NS |
Black |
FB |
50 |
OM4 |
4700 MHz-km |
3500 MHz-km |
3.0 dB/km |
1.0 dB/km |
NS |
Black |
XB |
50 |
OM4+ |
4900 MHz-km |
3675 MHz-km |
3.0 dB/km |
1.0 dB/km |
NS |
Black |
NS = Not Specified |
-
Manufacturing Release
IMPORTANT NOTICE: This product specification is provided for informational purposes only in order to illustrate typical product constructions, applications and/or methods of installation. Because conditions of actual installation and use are unique and will vary, Berk-Tek makes no representation or warranty as to the reliability, accuracy or completeness of this data, even if Berk-Tek is aware of the product's intended use or purpose. Furthermore, this data does not constitute, nor should it be regarded or relied upon, as professional engineering advice. Installation of product should only be done by qualified personnel and in conformance with all safety, electrical and other applicable codes, standards, rules or regulations. Appropriate and correct product selection, installation and use, and compliance with all such codes, standards, rules and regulations, is a customer/end-user responsibility. Product specifications, standards, programs or services are subject to improvement or changes without notice. Berk-Tek accepts no liability for typographical errors, technical inaccuracies, omissions or misuse of the information contained herein. Changes will be periodically made to address any such issues.