Description
Standards
International : EN 50173; ISO/IEC 11801National : ANSI/TIA-568.3-D; Telcordia GR-409
Description
Construction
Each cable utilizes individual subunits containing a single 900 um tight buffered fiber, surrounded by aramid yarns. Cable design accommodates from 2 to 48 fibers.
- Each fiber in an individual compact, numbered, aramid-filled subunit
- Tape wrapped dry core
- Colored high-strength ripcord
- Aluminum (standard) or steel interlock armored cables available
Applications
Berk-Tek’s Heavy Duty Breakout cables are suitable for all passive and active optical network designs requiring high speed voice, video, and data applications, including (but not limited to):
- ETHERNET: 10BASE – 400GBASE (10BASE, 100BASE, 1000BASE, 10GBASE, 40GBASE, 100GBASE, 400GBASE)
- Fibre Channel: 1G-FC – 128GFC (1, 2, 4, 8, 16, 32, 128 GFC)
- SONET: OC-1 – OC-768 (OC -1, 3, 12, 24, 48, 192, 768)
- SDH: STM-0 – STM-256 (STM-0, 1, 4, 16, 64, 256)
- OTN: OTU-1 – OTU4 (OTU1, 2, 2e, 2f, 3, 3e2, 4)
- CPRI: CPRI-1 – CPRI-9 (CPRI-1, 2, 3, 4, 5, 6, 7, 7a, 8, 9)
- PON (SMF ONLY): RFoG, APON, BPON, EPON, GPON, WDM-PON, NG-PON
Features
- Multimode, Single-mode, and GIGAliteTM fibers
- Available with new bend-insensitive single-mode fibers
- High tensile strength, crush resistant
- All-dielectric, aluminum or steel interlock armored designs available
- Riser or low smoke zero halogen riser rated
- Indoor/Outdoor dry water-blocked designs available
Benefits
- One cable design meeting all structured cabling network communications applications
- High tensile strength provides for greater pulling distances
- Ease of installation
- Broad design selection allows for mix and match of fiber components to specific networking applications
- Low cable plant maintenance
- Armor option adds crush resistance and protection from rodent attacks
Country of Origin: U.S.A.
Characteristics
| Construction characteristics | |
|---|---|
| Fiber optic type | OM3 50/125 |
| Type of cable | Tight Buffered (TB) |
| Jacket Material | Riser |
| Sheath colour | Aqua |
| Dimensional characteristics | |
| Number of optical fibres | 6 |
| Tube diameter | 2mm |
| Cable diameter (Nominal) | 0.315in |
| Nominal outer diameter | 8.0mm |
| Nominal cable weight | 48lb/kft |
| Approximate weight | 72kg/km |
| Transmission characteristics | |
| Optical performance | EB (50/125 GIGAlite-10, OM3) |
| Attenuation, max. 850 nm (cabled) | 3.0dB/km |
| Attenuation, max. 1300 nm (cabled) | 1.0dB/km |
| Mechanical characteristics | |
| Maximum installation tension | 150lb |
| Maximum installation tension | 660N |
| Max. Load. Long Term (lbs) | 45.0lb |
| Max. Load. Long Term | 198.0N |
| Impacts per TIA/EIA FOTP-25 | 2 at 5.88 N-m |
| Crush resistance per TIA/EIA FOTP-41 | 100N/cm |
| Cable flexibility per TIA/EIA FOTP-104 | 100 cycles |
| Usage characteristics | |
| Minimum Bending Radius - Install | 4.7in |
| Minimum Bend Radius - Install | 12cm |
| Minimum Bending Radius - LongTerm | 3.2in |
| Minimum Bending Radius - LongTerm | 8cm |
| Recommended operating temperature range | -20 .. 75°C |
| Ambient installation temperature, range | -20 .. 75°C |
| Recommended storage temperature range | -40 .. 85°C |
| Field of application | Indoor |
Docs and info
-
Standard Sheath Colors - Tight Buffer
-
Manufacturing Release
IMPORTANT NOTICE: This product specification is provided for informational purposes only in order to illustrate typical product constructions, applications and/or methods of installation. Because conditions of actual installation and use are unique and will vary, Berk-Tek makes no representation or warranty as to the reliability, accuracy or completeness of this data, even if Berk-Tek is aware of the product's intended use or purpose. Furthermore, this data does not constitute, nor should it be regarded or relied upon, as professional engineering advice. Installation of product should only be done by qualified personnel and in conformance with all safety, electrical and other applicable codes, standards, rules or regulations. Appropriate and correct product selection, installation and use, and compliance with all such codes, standards, rules and regulations, is a customer/end-user responsibility. Product specifications, standards, programs or services are subject to improvement or changes without notice. Berk-Tek accepts no liability for typographical errors, technical inaccuracies, omissions or misuse of the information contained herein. Changes will be periodically made to address any such issues.
