6 x OS2 Premises Distribution Low Smoke Zero Halogen Riser Cable with Aluminum Interlock Armor
See all Indoor LSZH Riser Premises Distribution w/ Armor-Tek™ (PDRZK) products
Description
Standards
International : EN 50173; IEC 60332-1-2; IEC 60332-1-3; IEC 60332-2-2; IEC 60332-3-24 Cat.C; IEC 60332-3-25 Cat.D; IEC 61034-2; ISO/IEC 11801National : ANSI/ICEA S-83-596; ANSI/TIA-568.3-D; Telcordia GR-409
Description
Berk-Tek's Premise Distribution LSZH Armor-Tek cable is a riser rated tight buffered design. Armor-Tek Interlock Armor is formed around the LSZH Premises Distribution cable core. A riser rated sheath is then extruded around the interlocking armor.
Construction
900 µm buffered fibers surrounded by aramid yarns. Sheathed using a special, state-of-the-art low smoke zero halogen polymer material.
Outdoor Considerations
Black jacketed and water-blocked core versions of riser cables suitable for Indoor/Outdoor installations in-conduit and below the frost line are available upon request. Outdoor versions feature UV and fungus resistant jacketing.
Applications
Berk-Tek's tight buffered cable is intended for all high speed data applications including:
- ETHERNET: 10BASE – 400GBASE (10BASE, 100BASE, 1000BASE, 10GBASE, 40GBASE, 100GBASE, 400GBASE)
- Fibre Channel: 1G-FC – 128GFC (1, 2, 4, 8, 16, 32, 128 GFC)
- SONET: OC-1 – OC-768 (OC -1, 3, 12, 24, 48, 192, 768)
- SDH: STM-0 – STM-256 (STM-0, 1, 4, 16, 64, 256)
- OTN: OTU-1 – OTU4 (OTU1, 2, 2e, 2f, 3, 3e2, 4)
- CPRI: CPRI-1 – CPRI-9 (CPRI-1, 2, 3, 4, 5, 6, 7, 7a, 8, 9)
Features
- Low Smoke Zero Halogen rated cable
- IEC 60332-1-2
- IEC 60332-1-3
- IEC 60332-2-2
- IEC 60332-3-24 Category C
- IEC 60332-3-25 Category D
- IEC 61034-2
- Flexible, small diameter, 900 µm tight buffered construction
- High tensile strength and small diameter design
- Six to 48 count fiber construction riser designs ideal for horizontal and backbone installation
- Single-mode, multimode, and hybrid designs available
Benefits
- Eliminates the need for conduit or plenum innerduct
- Significant cost savings in both materials and labor - up to 25%
- Accommodates last minute relocations or pathway changes
- Provides a higher concentration of cables in an area than conduit
- Can be installed in campus environments due to the durability and indoor/outdoor rating of the cable
- Armor provides crush protection and protection from rodent attacks
Characteristics
| Construction characteristics | |
|---|---|
| Fiber optic type | SM (G.652D) |
| Type of cable | Tight buffer |
| Jacket Material | LSZH-FR |
| Sheath colour | Yellow |
| Armour type | Aluminum Interlock |
| Dimensional characteristics | |
| Number of optical fibres | 6 |
| Cable diameter (Nominal) | 0.656in |
| Nominal outer diameter | 16.7mm |
| Nominal cable weight | 139lb/kft |
| Approximate weight | 206kg/km |
| Transmission characteristics | |
| Optical performance | AB (Single-mode, OS2) |
| Attenuation, max. 1310 nm (cabled) | 0.5dB/km |
| Attenuation, max. 1550 nm (cabled) | 0.5dB/km |
| Mechanical characteristics | |
| Maximum installation tension | 150lb |
| Maximum installation tension | 667N |
| Max. Load. Long Term (lbs) | 45.0lb |
| Max. Load. Long Term | 200.0N |
| Impacts per TIA/EIA FOTP-25 | 2 at 8.83 N-m |
| Crush resistance per TIA/EIA FOTP-41 | 440N/cm |
| Cable flexibility per TIA/EIA FOTP-104 | 25 cycles |
| Usage characteristics | |
| Minimum Bending Radius - Install | 9.8in |
| Minimum Bend Radius - Install | 25cm |
| Minimum Bending Radius - LongTerm | 6.6in |
| Minimum Bending Radius - LongTerm | 16.7cm |
| Recommended operating temperature range | -20 .. 75°C |
| Ambient installation temperature, range | -20 .. 75°C |
| Recommended storage temperature range | -40 .. 85°C |
| Field of application | Indoor |
Docs and info
-
Cross-section Diagram - PDRZK006
-
Manufacturing Release
IMPORTANT NOTICE: This product specification is provided for informational purposes only in order to illustrate typical product constructions, applications and/or methods of installation. Because conditions of actual installation and use are unique and will vary, Berk-Tek makes no representation or warranty as to the reliability, accuracy or completeness of this data, even if Berk-Tek is aware of the product's intended use or purpose. Furthermore, this data does not constitute, nor should it be regarded or relied upon, as professional engineering advice. Installation of product should only be done by qualified personnel and in conformance with all safety, electrical and other applicable codes, standards, rules or regulations. Appropriate and correct product selection, installation and use, and compliance with all such codes, standards, rules and regulations, is a customer/end-user responsibility. Product specifications, standards, programs or services are subject to improvement or changes without notice. Berk-Tek accepts no liability for typographical errors, technical inaccuracies, omissions or misuse of the information contained herein. Changes will be periodically made to address any such issues.
